Changing User Codes Power Series DSC Alarm Systems

User Code Programming 

When system is in disarmed state enter: (*) + (5) + (Master Code) + (2 digit user number 01-48) + (new user code) + (#)  Let us assume your master code is 8888 and you want to add your first user code as user 01. Enter: * 5 8888 01 four digit user code # To change a user code just enter the new code over the old code. To change the code for user 01 enter: * 5 8888 01 new four digit user code # To remove a user from the system enter * in place of the four digit user code. To remove user 01 enter: * 5 8888 01 * # (*) + (5) + (8888 / master code)  Enters the system into user code programming mode (01) Selects the user numbers (01-48)  ( * or four digit user code) deletes user code or programs new code (#) Exits user code programming mode If you wanted to program codes for users  01, 02, & 12 your format would be * 5 8888 01 four digit code 02 four digit code 12 four digit code # NOTE: By default the alarm system accepts four (4) digit user codes but the system can be programmed to accept six (6) digit user codes. Each user can be assigned different functions such as: One-time access code - User can arm the system once per day and the system resets code at                                                                           midnight Allow or Block user(s) from bypassing zone(s) User Partition Programming - Restrict or Allow user(s) access on multiple keypads programmed for                                                             partitioning Change other user codes Access the alarm system remotely from any touch-tone phone Duress Code - Arms / Disarms system as usual but sends a "duress" signal to the monitoring station (if used). If you are forced under gunpoint, for example to open and disarm your business or home the duress code is what you will use to disarm and safely signal for help.